PDR Dent Removal Pops A Dent Paintless Dent Repair Pulling Bridge Car Dent Repair Tools
Preheat the gun for 3-5 minutes, then insert the bar and melt it.
Wipe the repaired area and keep it dry.
Choose a suitable sized gasket, sucker, and squeeze the glue onto the pad, Squeeze the glue onto the gasket, stick it to the recess and press it slightly to strengthen the glue and the firmness of the gasket.
When the hot melt is hardened, place the aluminum bridge repair device on it, fix it, turn the knob on the middle screw, and then screw it into the dent and pull it up to the right place.
Spray the alcohol in the adhesion, and after it softens, scrape away with the scraper. If the effect is not perfect, you should be patient and use it many times.